Free IPAD

'Nanoscoops' could spark new generation of electric automobile batteries

New nanoengineered batteries developed at Rensselaer exhibit remarkable power density, charging more than 40 times faster than today's lithium-ion batteries.

Troy, N.Y. â€" An entirely new type of nanomaterial developed at Rensselaer Polytechnic Institute could enable the next generation of high-power rechargeable lithium (Li)-ion batteries for electric automobiles, as well as batteries for laptop computers, mobile phones, and other portable devices.

The new material, dubbed a "nanoscoop" because its shape resembles a cone with a scoop of ice cream on top, can withstand extremely high rates of charge and discharge that would cause conventional electrodes used in today's Li-ion batteries to rapidly deteriorate and fail. The nanoscoop's success lies in its unique material composition, structure, and size.

The Rensselaer research team, led by Professor Nikhil Koratkar, demonstrated how a nanoscoop electrode could be charged and discharged at a rate 40 to 60 times faster than conventional battery anodes, while maintaining a comparable energy density. This stellar performance, which was achieved over 100 continuous charge/discharge cycles, has the team confident that their new technology holds significant potential for the design and realization of high-power, high-capacity Li-ion rechargeable batteries.

Nanoscoops

Nanoscoops

Nanoscoops

Caption: Researchers at Rensselaer Polytechnic Institute developed an entirely new type of nanomaterial that could enable the next generation of high-power rechargeable lithium (Li)-ion batteries for electric automobiles, laptop computers, mobile phones and other devices. The material, called a "nanoscoop" because it resembles a cone with a scoop of ice cream on top, is shown in the above scanning electron microscope image. Nanoscoops can withstand extremely high rates of charge and discharge that would cause today's Li-ion batteries to rapidly deteriorate and fail.

Credit: Rensselaer/Koratkar. Usage Restrictions: Please include image credit."Charging my laptop or cell phone in a few minutes, rather than an hour, sounds pretty good to me," said Koratkar, a professor in the Department of Mechanical, Aerospace, and Nuclear Engineering at Rensselaer. "By using our nanoscoops as the anode architecture for Li-ion rechargeable batteries, this is a very real prospect. Moreover, this technology could potentially be ramped up to suit the demanding needs of batteries for electric automobiles."

Batteries for all-electric vehicles must deliver high power densities in addition to high energy densities, Koatkar said. These vehicles today use supercapacitors to perform power-intensive functions, such as starting the vehicle and rapid acceleration, in conjunction with conventional batteries that deliver high energy density for normal cruise driving and other operations. Koratkar said the invention of nanoscoops may enable these two separate systems to be combined into a single, more efficient battery unit.

Results of the study were detailed in the paper "Functionally Strain-Graded Nanoscoops for High Power Li-Ion Battery Anodes," published Thursday by the journal Nano Letters. See the full paper at: pubs.acs.org/doi/abs/10.1021/

The anode structure of a Li-ion battery physically grows and shrinks as the battery charges or discharges. When charging, the addition of Li ions increases the volume of the anode, while discharging has the opposite effect. These volume changes result in a buildup of stress in the anode. Too great a stress that builds up too quickly, as in the case of a battery charging or discharging at high speeds, can cause the battery to fail prematurely. This is why most batteries in today's portable electronic devices like cell phones and laptops charge very slowly â€" the slow charge rate is intentional and designed to protect the battery from stress-induced damage.

The Rensselaer team's nanoscoop, however, was engineered to withstand this buildup of stress. Made from a carbon (C) nanorod base topped with a thin layer of nanoscale aluminum (Al) and a "scoop" of nanoscale silicon (Si), the structures are flexible and able to quickly accept and discharge Li ions at extremely fast rates without sustaining significant damage. The segmented structure of the nanoscoop allows the strain to be gradually transferred from the C base to the Al layer, and finally to the Si scoop. This natural strain gradation provides for a less abrupt transition in stress across the material interfaces, leading to improved structural integrity of the electrode.

The nanoscale size of the scoop is also vital since nanostructures are less prone to cracking than bulk materials, according to Koratkar.
"Due to their nanoscale size, our nanoscoops can soak and release Li at high rates far more effectively than the macroscale anodes used in today's Li-ion batteries," he said. "This means our nanoscoop may be the solution to a critical problem facing auto companies and other battery manufacturers â€" how can you increase the power density of a battery while still keeping the energy density high?"

A limitation of the nanoscoop architecture is the relatively low total mass of the electrode, Koratkar said. To solve this, the team's next steps are to try growing longer scoops with greater mass, or develop a method for stacking layers of nanoscoops on top of each other. Another possibility the team is exploring includes growing the nanoscoops on large flexible substrates that can be rolled or shaped to fit along the contours or chassis of the automobile. ###

Along with Koratkar, authors on the paper are Toh-Ming Lu, the R.P. Baker Distinguished Professor of Physics and associate director of the Center for Integrated Electronics at Rensselaer; and Rahul Krishnan, a graduate student in the Department of Materials Science and Engineering at Rensselaer.

This study was supported by the National Science Foundation (NSF) and the New York State Energy Research and Development Authority (NYSERDA).

For more information on Koratkar's research at Rensselaer, visit:

  • Water Could Hold Answer to Graphene Nanoelectronics
    news.rpi.edu/update.do?artcenterkey=2783
  • Using Nanotubes To Detect and Repair Cracks in Aircraft Wings
    news.rpi.edu/update.do?artcenterkey=2321
  • Researchers Secure $1 Million Grant To Develop Oil Exploration Game-Changer
    news.rpi.edu/update.do?artcenterkey=2700

For more information on Lu's research at Rensselaer, visit:

  • Slimmer, Stickier Nanorods Give Boost to 3-D Computer Chips
    news.rpi.edu/update.do?artcenterkey=2542
  • New Polymer Could Improve Semiconductor Manufacturing, Packaging
    news.rpi.edu/update.do?artcenterkey=2394
  • Professor Toh-Ming Lu Named Fellow of the Materials Research Society
    news.rpi.edu/update.do?artcenterkey=2413
Contact: Michael Mullaney. Rensselaer Polytechnic Institute. Troy, NY 518-276-6161 mullam@rpi.edu, www.rpi.edu/news

Visit the Rensselaer research and discovery blog: approach.rpi.edu

Follow us on Twitter: www.twitter.com/RPInews


 
© 2010 ITechCrunch - Technology, Gadgets, Internet

All information, data, advertisements, applications, listings, services, video and media clip files contained on or made available through this Website are owned by their respective owners/companies. will in no way be liable to you or anyone else for any loss or damage.